| Screen configuration | Motherboard configuration |
| Screen size: 43" | Built-in dual eight 24-bit LVDS, support 1920 * 1080 resolution,
support dual screen display. |
| Resolution: 1920 (RGB) × 1080 [FHD] | Onboard 2*Mini-PCIE, support WIFI, 3G & MSATA. |
| Display size: 941.184 × 529.416 mm (H × V) | Support 7*24H running around the clock. 6COM and 2COM are optional.
6COM supports RS485/422, dual network 6COM version of industrial
computer preferred. |
| Visual size: 945.18 × 533.42 mm (H × V) | Onboard HDMI interface, support 1920*1080 HD playback, onboard 5W
amplifier, Spdif fiber. |
| Brightness (cd/m2): 400 (Typ.) | Standard LPT pin for on-board print port. |
| Best angle: full view | Dimensions |
| Viewing angle: 89/89/89/89 (Min.) (CR ≥ 10) | Mini-ITX frame, 170mm*170mm |
| Pitch: 0.227mm (H) x 0.227mm (W) | Thickness: 18mm audio interface |
| Number of colors: 16.7M/1.07B, 95% [CIE1931] | Integrated Realtek ALC662 HD digital audio decoder |
| Screen weight: 6.30Kgs (Typ./Max.) | Supports Line-out, MIC-in interface, with front pin pins. |
| Refresh rate: 60Hz | Onboard 5W amplifier, supporting Spdif fiber output |
| Signal system: LVDS (2 ch, 10-bit), terminal, 51 pins | processor |
| Supply voltage: 12.0V (Typ.) | Core 3217U, 3317U, 3517U, dual core 1.7G or 1.8G or 1.9G. Low power
consumption and fast operation. The processor integrates the
display core and the memory controller. I/O expansion |
| Maximum rating: Storage temperature: -20 ~ 60 °C Operating
temperature: 0 ~ 50 °C | 7*USB, high speed USB 2.0 controller, 480Mbps rate. 2*RS232 COM,
6COM optional, RS485 optional. |
| Screen type: LCD module, a-Si TFT-LCD. | Standard pin on the onboard print port. |
| Pixel configuration: RGB vertical strip | |
| Appearance size: 975.5 × 582.2 × 10.5 (H × V × D) | |
| Surface treatment: matte (Haze 3%), Hard coating (1H) | |
| Contrast ratio: 1100 : 1 (Typ.) [Transmission] | |
| Optical mode: IPS, normally black display, transmissive | |
| Response speed: 6 (Typ.) (G to G) ms | |
| Backlight type: WLED, 30K hours, no drive | |
| Infrared touch |
| Material: tempered glass |
| Glass thickness: 3mm, 4mm, 6mm |
| Surface abrasion strength: strong, determined by the glass surface |
| Transparency: ≥95%, up to 100% (no glass) |
| Homogeneity: good |
| Touch the parameter | Electrical parameters |
| The number of times the theory is determined by the degree of glass
wear | Working voltage: 4.5 ~ 5.5Vdc |
| Design life: more than 5 years | Working current: ≤120mA |
| Touch the fastest response speed: 6ms | Power: ≤ 900mW |
| Touch the average reaction speed: 8ms | |
